Reply To: First Print (Warning: Unspectacular)

[ianska 704xp 0]

No brim. I only use a brim with small pieces that are likely to fall off. It seems odd that it came unstuck that far into the print with that much of a surface area on the bed. Are you sure the beds level? not sure how it works on the Prusa. Do they have auto leveling?

Coming unstuck can be a combination of things though, bed leveling, type of PLA used or a sudden change in room temp where the bed cools too much and the print unsticks before it’s got up to temp again. I’d try the acetone and a level before hairspray and glue though 🙂