Skip to toolbar
Wasteland Warfare

Wasteland Warfare

Supported by (Turn Off)

Project Blog by tomd

Recommendations: 109

About the Project

Pre-order arrive from Modiphius (Fallout Wasteland Warfare BOS starter plus extras). I pre-order on Nov 1 and pickup the resin starter upgrade which cause some delays in my order,but the guys at Modiphius gave us the alien and plastic starter as a free-be for the delay :) Very cool Thanks guys. From game geeks i order the Red Rocket scenic set with some bottle caps.

This Project is Active

Larger token

Tutoring 0
Skill 1
Idea 1
No Comments
searchable tokensearchable token
3d tokens3d tokens
reusing bottle cap for AI tokenreusing bottle cap for AI token
Ready token Ready token
Slow fireSlow fire

BOS starter

Tutoring 1
Skill 2
Idea 0
No Comments
BOS starter

Scribes

Tutoring 1
Skill 2
Idea 0
No Comments
i use a basic brown palette with all the references i have seen scribe look the dirtiest.i use a basic brown palette with all the references i have seen scribe look the dirtiest.

I lump Knight Captain Cade in with the BOS scribes because i though he was some logistic office. I am still not sure who he is.

Scribes

Skin tone barbarian flesh

skin wash is GW flesh wash

skin highlight barbarian flesh

shirt base color of lava orange

pants and main pack painted leather brown

pants wash with agax earthshade

highlight with leather brown and light brown

vest base color of oak brown

wash with nuhn oil

armor khaki

wash in nuhn oil

boot are black

boot gaiter light brown

red brown on some pouches

wash with nuhn oil

Base were dry brush in khaki and detail were pick out and sand and homemade tuff added.

Lancer

Tutoring 1
Skill 2
Idea 0
No Comments
Finished up a pair of Lancer for FWWFinished up a pair of Lancer for FWW

Base coat of Matt black

zenith the satin almond

Skin painted with barbarian flesh

skin wash with GW flesh wash

highlight up to barbarian flesh

Base uniform Lava orange

washed with Nuln oil

highlight with lava orange

boots, glove and padding  oak brown

highlighted with leather brown

helmet base mummy robes

washed with agax earthshade

highlight with matt white

laser rifle base of black

Rifle body painted angel green

highlighted with plate mail metal

fusion cell demonic yellow

Knight Patrol

Tutoring 1
Skill 2
Idea 0
No Comments
i pick a black and tan scheme for my gruntsi pick a black and tan scheme for my grunts

Base primed Matt black

skin barbarian flesh

skin wash flesh wash

Armor base khaki

armor wash with agrax earthshade

armor highlight Iraqui sand

weapon base matt black

weapon body angel green

weapon highlight  plate mail metal

fusion cell demonic yellow

leather straps, ammo pouch red leather

leather wash nuhn oil

 

Doggy drool

Tutoring 1
Skill 2
Idea 1
No Comments

Doggy drool

i seen this technique done with snot or puss for plague marines.  i use hot glue dab on wax paper (baking paper) and used a tooth pick(cocktail stick) to apply a small amount from the dab of hot glue to the glum line of the hounds and pull down over the teeth pass the bottom jaw until it cool.

Paladin Danse and eyebot

Tutoring 2
Skill 4
Idea 2
No Comments
Paladin Danse and eyebot

Paladin Danse power armor was paint similar to the knights below.

skin tone  barbarian flesh

skin wash with flesh wash

highlight barabian flesh

black wash was used for a 5-o-clock shadow look.

Eyebot base in Matt black

dry brushed in plate mail metal

black wash in the grill and in the seams

highlighted with beaten copper

Deathclaw conversion

Tutoring 3
Skill 3
Idea 5
No Comments
Using the hot water - cool water technique i was able to repose my PVC deathclaw after i remove it from the base.Using the hot water - cool water technique i was able to repose my PVC deathclaw after i remove it from the base.

Primed using a Satin brown Automotive primer

Dabbed on Black,nutmeg brown to get the motley pattern all over my deathclaw concentrating the darker color on the armor hide light brown on the stomach area.

dry brush khaki all over

eyes pure red

mouth  and tongue grimoire purple

claws and teeth iraqui sand

I cant help myself i 3d print a braham corpse for my deathclaws to play with.I cant help myself i 3d print a braham corpse for my deathclaws to play with.

BOS Power armor

Tutoring 3
Skill 4
Idea 4
No Comments
Simple paint schemeSimple paint scheme
added an orange brown wash to simulate rust.added an orange brown wash to simulate rust.

Primed matte black(automotive primer)

Washed Vallejo orange brown

dry brushed armor with plate mail metal

Flexible part of the power armor and the detail on the backpack in iraqui sand

rank stripe in pure red

helmet lens in ultramarine blue

helmet light iraqui sand

laser rifle body angel green

laser rifle highlight in plate mail metal

Fusion cell demonic yellow

 

generic power armor

dry brush in military green

dabbed with plate mail metal for a worn look

helmet lens pure red

 

Base khaki and netmeg browns

flock with sand

 

More Orange

Tutoring 0
Skill 3
Idea 2
No Comments
More Orange. i added some vallejo orange brown to the super mutant armor.More Orange. i added some vallejo orange brown to the super mutant armor.
More Orange

Super Mutants

Tutoring 6
Skill 6
Idea 4
3 Comments
I found these very enjoyable to paint :).I found these very enjoyable to paint :).

My basic painting style is to start from the skin and work outwards.

 

Base coat: army painter green primer then wash with GW Nuhn oil.

Skin tone AP greenskin .

First highlight AP goblin green.

Cloth (i use different color cloth to help individualize them) Ap pure red, Hideous blue, mummy robe washed with agax earthshade.

Cloth padding under armor AP oak brown.

First highlight leather brown.

Rope binding leather brown and beige (50/50)

Armor plate base matt black

Dabbed with oak brown and light brown in random patterns

Highlight (dabbing) with platemail and beaten copper randomly.

Wash with nuln oil let dry wash with agax earthshade.

Weapon base  matt black

Highlight with beaten copper or plate mail metal

Wood base oak brown

Highlight with leather brown

Base are done with apple barrel brand khaki and added sand and homemade tuffs and painted black around the edge.

 

I cant help myself :) i have started converting my duplicate model.

Tutoring 3
Skill 7
Idea 7
No Comments
Weapon swap upgrade from pipe rifle to 3d printed minigunWeapon swap upgrade from pipe rifle to 3d printed minigun
upgrade sledge hammer to 3d printed rocket hammer (super sledge)upgrade sledge hammer to 3d printed rocket hammer (super sledge)

other related projects

Tutoring 0
Skill 0
Idea 2
No Comments

Mutant Hounds

Tutoring 5
Skill 6
Idea 4
No Comments
I havent painted miniature in awhile so i stater off with something easy.I havent painted miniature in awhile so i stater off with something easy.
I went with a bright green color palette over the mute brown of fallout 4 Super mutant.I went with a bright green color palette over the mute brown of fallout 4 Super mutant.

Primed Army painter green

Washed with (Citadel)Nuln oil

base skin color Army painter(AP)greenskin

first highlight AP goblin green

second highlight AP goblen green and jungle green (50/ 50)

teeth and claws mummy robes then washed with Citadel agrax earthshade

Gums and tongue and tip of nose AP grimoire purple

snout and underside leather brown

Base drybrush Vallejo Iraqui sand added homemade grass tuffs

 

Getting started

Tutoring 1
Skill 1
Idea 4
2 Comments
I got 40 miniatures from the Botherhood of Steel stater set and free-be Modiphius gave out. It took me about 3 hour clean up and assemble with only some minor base warping to deal with.I got 40 miniatures from the Botherhood of Steel stater set and free-be Modiphius gave out. It took me about 3 hour clean up and assemble with only some minor base warping to deal with.
Red Rocket Scenic set with rubber mat. This went together easy enough. but i glue the main building to its base and i glued the detachable roof as one peace separate from the rocket awning.Red Rocket Scenic set with rubber mat. This went together easy enough. but i glue the main building to its base and i glued the detachable roof as one peace separate from the rocket awning.

I use masking tape on the bottom to hold the card stock together and use PVA glue them together, because the base sheet come perforated, i was scare it make come apart over time.

the cars i have seem a little to big LOL

Supported by (Turn Off)