![Perfect Historical Wargame Objectives! Victrix Treasures & More Reviewed [7 Days Early Access]](https://images.beastsofwar.com/2026/02/unboxing-victrix-treasures_-chests-_-market-stalls-coverimage-225-127.jpg)
Kill Team Truehawk Spaceship in Space Hulk
Recommendations: 318
About the Project
As part of the Space Hulk Challenge I decided to go with an Idea that I had since the Rogue Trader Box came out; To make a real Terrain peace out of the cardboard tile.
Related Game: Space Hulk
Related Company: Games Workshop
Related Genre: Science Fiction
This Project is Active
A lesson for everyone
Because the foam is so absorbent, I putting the 3rd code on. You should always use just the best you can find. Me for example, I spared no expense using this very "basic color", AKA finger paint, mixed with top of the line PVC floor sealer.
And most important never be cheap with brushes, only the best is good enough, see here my old toothbrush, doing an excellent job !Along the road
So I took some time and a hammer to beat the pattern into the fome. got the second coat of a mixture of paint and gloss varnish.
So Im really not sure...
Well first I stepped on a piece with my shoe and thought, thats an interesting pattern, and took that thought and applied it to the GW terrain, that still is in the sprue(well not anymore) I just stepped on it an well If I were a little bit heavier, it would have worked better. but sill it was not bad...
So I put it under my bed post, and jumped on it, and it worked really well. well on a piece that small, I'll ever be able to apply that kind of work to the whole ship!? Im really torn right now. the result is rally good but how I get there is still not sure. I have to lift and jump up and down the bed every time...
On we go...
I knew from the beginning that I wanted the cockpit to have a lower part, inspired by the cockpit of an star destroyer
so I cut this specific part out and was really pleased with the result
and then I thought; why not just cut out the whole ship and make it look even more 3D, so that what I did, and it was a horror. It took me forever to cut it all out, but in the end I think it was worth it, course it looks so much better
And as I was finished, and lay the cutout on the cardboard to check for errors, I saw how much I diviated from the original lines(not good to see on the photos but belive me)So we start...
So I took a sheet of foam core, and some translucent paper to trace the outlines of the walls, well it worked quite well, but later I realized who warped it all got, but spoilers. in hindsight I should have used a single piece of packing paper
So I peeled the paper from one side of the fomecore, and with the tracing paper and a needle I punched a hole in every corner, from there I took a ruler a knife and a pen and trached all the wall outlines. On the floor on my F…g knees, course my table is too messy and am too lazy to clean it up -.-
How It All Began
Well the Idea was Simple, the Bord of the Truehawkwas so amazing that I had the idea to build something better since I saw the first pictures
