Reply To: Help with Weeping Resin

[blinky465 17178xp 0]

It sounds very much like you’ve a resin model with uncured resin inside.
Whether it’s 3d printed or not, that’s almost always the root cause of weeping models. And if it’s uncured resin trapped inside, no amount of washing, priming, painting etc. will fix it, sorry.
That it’s weeping from points where you drilled it also suggests it’s something leaking out from inside the body of  the resin part(s).

But it’s also possible that if the only affected part is where you drilled and glued the barrel that your glue has reacted with the resin and caused it to break down? That your plastic pin melted suggests there’s some kind of chemical reaction going in here – either the leaking resin with the plastic, or possibly the glue with the resin, so I wouldn’t rule out your glue being the culprit here.