![A Perfect Zombie Apocalypse Starter Set? Civilians & Survivors Review | Wargames Atlantic [7 Days Early Access]](https://images.beastsofwar.com/2026/01/unboxing-wargames-atlantic-civilians-_-survivors-1_2-coverimage-225-127.jpg)
![Wild Australia Wargaming? 28mm Ned Kelly Gang & Victorian Police Review [7 Days Early Access]](https://images.beastsofwar.com/2026/01/unboxing-traders-galaxy-australiana-ned-kelly-gang-_-victorian-police-coverimage-225-127.jpg)
Terrain Fest 2025 – Ancrabourg by Poentje
Recommendations: 51
About the Project
A couple of years ago I backed the Kickstarter for Ancrabourg: A modular medieval harbor by 3DLayeredScenery. I have since then printed a lot of buildings which are in dire need of some paint. This years Terrain Fest is a good reason to get painting.
Related Genre: Fantasy
Related Contest: TerrainFest 2025
This Project is Active
Stonework 2
More pictures
And my 3D printers have been working on the background, so here are four extra buildings with no paint on them.
Ropeyard
Shipyard
Tavern
WarehouseStonework
The next step was to block in all the stonework on the models. I did this with my airbrush and used Vallejo Surface Primer Desert Tan – 74613. By now the bulk of the priming is finished. From now on I going to finish one building at a time.
Here are some pictures:
Woodwork 3
Pete’s fishy business
Mayor’s house
The prison
And here is an overview of the total so far. Next step is to block in the stonework and print a couple of more buildings.
Woodwork 2
The fishermans hut and the fishmongers hut. I accidentaly printed the fishmongers hut twice, once in black filament and once in light gray filament.
The administrative building and the harbor master’s office
Woodwork 1
The next step was to block in all the woodwork on the models. I did this with my airbrush and used Vallejo Surface Primer IDS Israeli Sand – 74614. This step took me quite al long time and I’m sure I missed some spots but I will correct them after the next step of stonework.
Here are some pictures of the civilian houses
The cannon smith workshop and the drawbridge
Roofing
As a start for the project I took my airbrush and painted the roofs of the buildings. The airbrush realy speeds up the proces.
I used Vallejo surface primer German red brown – 74605. The buildings in black filament take the paint a little bit harder, so I had to give them a couple of coats more.
