Reply To: Airbrush blowing but not spraying: Help needed please

[craigwrdouglas 2306xp 1]

I tend to use isopropanol for cleaning paint such as vallejo air or citadel air.

After using the Vallejo polyurethane primer I use Premi Air foaming airbrush cleaner to clean the airbrush  when I need something with a bit of kick or there is a blockage.

https://airbrushes.com/product_info.php?products_id=572

The Allclad II airbrush cleaner is also pretty good at removing primer residue from inside the airbrush.

The first time I used the allclad cleaner it stripped a massive load of black primer gunk that had built up over months from the inside of the airbrush. It should dislodge with either the foaming or  the allclad cleaner. it shouldn’t build up if you use the foaming cleaner regularly e.g. after primer, at the end of a session or if you are trying to clear a blockage.

.