I have (more than) a few – improving my hobby area has been what has kept me sane during lock down (pics of modules/set up below)
In terms of tools needed, I used a Stanly knife to trim the connectors, wood glue to join the pieces and masking tape to keep things together while the glue dried. I also used a a rubber mallet to knock the magnets into the holes (no glue needed), but any hammer/blunt object would do. One tip I found useful was to mark the polarity on the magnets with a felt tip pen before I started so that I put them in correctly.
The most useful modules I have found are the paint racks, six draw units (for bits), a 3 draw unit (for tools), the spru holders and the display cases. The sprue holders and display cases were the biggest supprise, but I have found I really like being able to see my minis while I build/paint and that keeping the spurs out of my build area has made things a lot easier.
Hope this helps – let me know if you have any questions and I will do my best to answer them.
Toby
