Skip to toolbar
Pew Pew Power! (aka secrit tekk projekt)

Pew Pew Power! (aka secrit tekk projekt)

Supported by (Turn Off)

Project Blog by sundancer

Recommendations: 27

About the Project

So I finished my laser tower and I think it needs sound!

This Project is Completed

Hurray, fixed the first parts! (Also, it's finished)

Tutoring 1
Skill 6
Idea 6
1 Comment

I only had one wire wrong… now I have a spare stereo sound set XD

Behold the pictures of my crappy soldering! But it works. 😉

 

Now I only need to get the hang of enhancing the Volume of the soundfile. It’s a bit quiet.

And maybe think of something with what I can hide the button *g*

Jumpcut!

Tutoring 0
Skill 0
Idea 6
No Comments

It has been some time and the initial parts have arrived but I somehow screwed that up. It seems to work but no sound will come from the speakers. Even though I added the amplifier. (Adafruit Mono 2.5W Class D Audio Amplifier – PAM8302)

So I ordered new parts and will try again! New parts:

  • Adafruit Audio FX Sound Board + 2x2W Amp – WAV/OGG Trigger – 2MB
  • Speaker – 3″ – 8 Ohm 1 Watt
  • 3-AA Battery Holder, Enclosed with Switch

And a new soldering iron to get it done properly 😉

Parts

Tutoring 2
Skill 0
Idea 6
No Comments

So for my tower to make noise I need something small. I stumbled across the Adafruit Audio FX Mini Sound Board and with just a few extra parts I should be able to make it go *boom* *pewpew* and *boooosh*. These are the parts that I will be using:

  • Adafruit Audio FX Mini Sound Board
  • 3-AA Battery Holder
  • 8 Mini Push Button Switch
  • 270 Pin Breadboard
  • Breadboard-Friendly PCB Mount Mini Speaker

Everything is ordered. Now to wait for the parts to arrive.

Supported by (Turn Off)