Skip to toolbar
Washed UP, 1490 Doom diorama board

Washed UP, 1490 Doom diorama board

Supported by (Turn Off)

Update 4

Tutoring 2
Skill 4
Idea 3
No Comments
Update 4

I finished building up the EVA foam and did a first detail pass by cutting diagonal and perpendicular across the foam stacks to emulate fault lines. This created a grid like pattern, which I attacked with tweezers adding depth and texture. The foam was sealed with a heat gun. I used foam clay to transition the EVA foam into the board, after heat sealing the foam the clay adhered to it far better than before.

Super glue releases hydrogen cyanide when heated, the surface of the foam should not reach temperatures high enough for this to be an issue though did this outdoors, used a respirator and left it for an hour to off gas.

Update 4

Next I started on the fishing settlement, these platforms that will form the bulk of the playable surface of the board and instantly provide a sense of scale.

Supported by (Turn Off)

Subscribe
Notify of
0 Comments
oldest
newest most voted
Inline Feedbacks
View all comments

Supported by (Turn Off)