Saloon 2 Boogaloo

Saloon 2 Boogaloo

Supported by (Turn Off)

Project Entry by blipvertus

Back to Project Blog

<< Previous Entry

Assembly

December 14, 2025

No Comments

I used Elmer’s white glue (a brand of PVA glue) for assembly. I used an X-acto knive and files to clear out the holes of excess paint and sanded the tabs and widen the slots were it was too tight.

First floor. I built the four walls first then then added the supports for the upper deck.

First floor. I built the four walls first then then added the supports for the upper deck.

Interior of the first floor. The PVA glue is still drying here.

Interior of the first floor. The PVA glue is still drying here.

Here I’m starting to add the railings to the deck. I had to clamp them in place to keep them from falling over. I used the adjustable wrench as a weight to make sure the upper deck fit snugly onto the supports.

Here I’m starting to add the railings to the deck. I had to clamp them in place to keep them from falling over. I used the adjustable wrench as a weight to make sure the upper deck fit snugly onto the supports.

Supported by (Turn Off)

Subscribe

0 Comments

oldest

newest most voted

Inline Feedbacks

View all comments