Reply To: Resin 3d printer recomendations

[tarrox 249xp 1]

To put it simply for now, currently not possible.

The problem is that SLA printers are more expensive for a given build volume and the cheap technology (which is LCD-SLA) is still developing and waiting for 4k LCD’s to start the magic happening.

So your best bet for a cheap SLA printer with that print volume is to wait for a cheap LCD-SLA printer with that volume. The problem with that is, that until we get cheap 4k LCD screens you basically pay with x-y resolution for your extended printing volume (which is why almost no one is making these machines as the dip in resolution is to big). An example is the Phrozen Shuffle XL which is the closest to your requirement but has a x-y resolution of 85 micron (compared to its smaller brother which has 47 micron resolution), which is something FDM printers can achive (With work put into understanding the machine to optimize it) for cheaper.

 

As a side note:

All resin printers are SLA printers, All of them! For whatever reason some people equate Laser-SLA with SLA which is factually wrong. so writing something like “DLP vs SLA” is like writing “Sedan vs CAR” one is the overarching term the other a implementation of that. The reason this is done is because to first SLA printers for consumers used Lasers (Although the first SLA printers used Lamps, before lasers became a common thing).

Saying this, there are currently 3 general implementations of SLA printer types – Laser-SLA which uses lasers (like mentioned, sometimes wrongly equated with SLA), DLP-SLA which uses a projector and LCD-SLA which uses LCD’s to project the layer onto the resin.