Skip to toolbar

Printing a really small ship with the Prusa i3

Home Forums 3D Printing for Tabletop Gaming Printing a really small ship with the Prusa i3

Supported by (Turn Off)

This topic contains 2 replies, has 3 voices, and was last updated by  basilbrush 6 years, 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1207087

    janus1004
    Member
    4165xp

    So I got inspired to see what happened if I took a 28mm .stl file and shrunk a sloop down to 15%… and it is kind of cool. I was surprised how much of the characteristic of the ship that survived the scale-down. It was printed using a 0.05mm layer height.

    IMG_1550

    Have not decided if I will paint it or not, but perhaps… think it would benefit from a mast and sail, and a tiny flag.. 🙂

    #1207211

    davehawes
    7768xp
    Cult of Games Member

    Makes me think of the classic Man O War game from GW, the scale more than anything makes me think that.

    #1207322

    basilbrush
    Participant
    554xp

    was his with the standard 0.4 nozzle? Try again with a 0.2 – makes the world of difference

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Supported by (Turn Off)