Space Hulk Tactics Hobby Challenge - Create A Project For A Chance To Win
Skip to toolbar
Harry Potter Miniatures Game painting guides

Harry Potter Miniatures Game painting guides

Supported by (Turn Off)

Painting the Hogwarts uniform

Tutoring 17
Skill 16
Idea 11
3 Comments

This time we’re looking at how to paint the basic Hogwarts uniform, following on from the preparing the models guide, using both the Dumbledore’s Army and Slytherin Students packs.

I’ve aimed to keep it as broad as possible, and you don’t need to work through all the steps if you don’t want too. In fact, you can even stop at any stage you like, do the basing (which I’ll cover next week), and come back to the models to add more detail at a later stage if you wish.

The final step in this particular guide will cover painting the house colours for Ravenclaw and Slytherin, and I’ll aim to cover the other houses at a later date.

In this and other guides I mainly use Vallejo with some Games Workshop paint, but if you can find colours from other ranges close to what I’m using, you’ll be just fine.

For brushes, I’ve just used a £5 paint brush set from The Range, though my preference is Windsor and Newton series 7. These brushes are far more expensive however, so for this guide I’m keeping the brushes to an affordable, realistic level for the average beginner.

 

Step 1

Paints used

Vallejo

904 Dark Blue Grey – Jumpers

867 Dark Bluegrey – Trousers/skirts

862 Black  Grey -Capes and shoes, Cho Chang hair

956 Flat Flesh – Skin

871 Leather Brown – Gregory Goyle and Vincent Crabbe hair

818 Red Leather – Ginny Weasley hair

916 Sand Yellow – Draco Malfoy and Luna Lovegood hair

Brush used

Size 2 from a £5 brush set

 

So, with the figures primed, we’ll start by simply and neatly blocking in the basic colours on the figures. Vallejo paint comes in dropper bottles and is quite thick, I use an old Pringles lid as a palette, and mix however much paint I put on the palette with an equal amount of water to thin it down and to help it flow. You don’t need that much paint though, as it goes quite a long way.

Games Workshop have some great videos on Youtube regarding this if you want some extra tips, though I like the paint to be around the consistency of milk.

Painting the Hogwarts uniform

Step 2

Paints used

Vallejo

815 Basic skin tone – Skin highlights

986 Deck Tan -Highlights on clothes

Brush used

Size 1 brush from a £5 paint set

 

This step Is starting to bring some detail and life to the figures. To do this, we start to apply some highlights to them. The purpose of this is to bring depth and interest to the detail, though if you wish to skip this stage, you can go straight to Step 3, or even to Final Details.

As with Step 1, we need to thin our paints, however, we need to thin them a little more than before and make them very thin. Keep adding water to the mix until the paint flows from your brush, though without losing control of the paint. Try it a few times and you’ll see what I mean.

With these highlights, we’ll be applying them to the raised areas of the faces and clothes, and start by placing the point of the brush at the highest point, then carefully drawing the brush back along the detail.  This can take some practice, and you do need to be neat, but the next stage will help to tidy things up, and will also reduce some of the contrast you’ll have too, as the figures will look quite chalky at the moment.

I’ve chosen not to highlight the shoes or hair at this stage, as we want to keep those for Stage 4.

Painting the Hogwarts uniform

Step 3

Games Workshop

Reikland Flesh -Shade Skin, and also Blond hair

Nuln Oil – Clothes, brown and black hair.

Brush used

Size 2 from a £5 brush set

 

So far you might be thinking all the colours are looking a little pale, well, there’s a cunning plan for this! We’re going to paint washes onto the model. This will serve 3 functions. Firstly, it will darken the figure down. Secondly, the wash will fill the recesses and add depth and shadow to the model, and finally, it will help blend our highlights from Step 2 into looking more natural.

A lot to ask maybe? Hopefully not. You can use these products straight from the pot, simply dip your brush in and paint them onto the relevant surfaces. Try not to let the wash pool, or run, simply apply it as you would any other paint.

It’s probably also worth giving it a few minutes between using the flesh and oil washes to prevent them running into one another!

Leave the figure to dry for an hour before Step 4, go on to the Finishing Off step.

Painting the Hogwarts uniform

Step 4

Paints used

Vallejo

815 Basic skin tone – Skin highlights

986 Deck Tan – Highlights on clothes

862 Black  Grey – Shoes, Cho Chang hair

871 Leather Brown – Gregory Goyle and Vincent Crabbe hair

916 Sand Yellow – Draco Malfoy and Luna Lovegood hair

Brush used

Size 1 brush from a £5 paint set

 

To really make the figures pop, we’ll add some final highlights. These are applied in the same was as in Step 2, however we’re going to be even more precise, and only apply them to the very highest points of the figure. We’ll also apply them to the highest edges of the details in the figures hair, and the tips of their shoes.

Painting the Hogwarts uniform

Finishing Off

Vallejo        

871 Leather Brown – Wands

0951 Matt White  – Shirts

Ravenclaw

Vallejo Game Colour

021 Magic Blue – Cape base colour

023 Electric Blue – Cape highlight

028 Dark Green – Book base colour

025 Foul Green – Book highlight

Slytherin

Vallejo Game Colour

028 Dark Green – Cape base colour

025 Foul Green – Cape highlight

 

The final thing the figures need now is finishing off with the colours of their respective houses. Firstly, paint their shirts white, then once that’s set, pick out their ties, the inside of the capes, the insides of the cuffs, and the insides of the hoods with the base colour listed above.

It’s worth doing a Google image search of the characters and their costumes from the movies to really get a feel of how the colours should look, and where they should be visible too.

Once you have those areas of the base colour down, just add a few highlights using the techniques we’ve covered before, and the figures are done, ready for basing!

That’s it for now, next time I’ll have a quick and simple guide on how to fill the gaps, and paint the stones on the models bases.

 

Quick note on the pics in this post. I’ve had to downgrade the quality of the images to actually get them uploaded. It’s been several hours and a lot of swearing, but it’s finally worked!

Painting the Hogwarts uniform

Supported by (Turn Off)

Leave a Reply

3 Comments on "Painting the Hogwarts uniform"

  Subscribe  
Notify of
lawnor
Member
3863xp

@volleyfireandy I’m currently painting up my Morticians Guild and I’m trying to follow your 2 different blacks. I’ve got the two base colours down and this weekend I hope to have time to finish the colours. Right now the 2 shades of grey look pretty much identical after 2 coats. Was this the case for you? Should I go for another coat or two to make the colours stronger? Your models look great and I can see a clear difference between your blacks in some of your shots. I was wondering if you had any after the fact opinions or advice, Like perhaps you would chose a lighter base grey for the skirts etc next time, or that you were doubtful to begin with, but the later stages really showed the tonal differences.

Supported by (Turn Off)