Skip to toolbar
3D Wolsung Terrain (spring cleaning challenge 2023)

3D Wolsung Terrain (spring cleaning challenge 2023)

Supported by (Turn Off)

Airship interior

Tutoring 3
Skill 3
Idea 3
No Comments

Ever since i watch the demo of Wolsung on Beast of War(On table top). I have an idea of rival clubs fighting for control of an airship or Dirigibles. On the inside, fighting through the hanger, cargo hull, engine room and finally the command center. I abandon that idea 6 years ago because i could not afford buy all the MDF kit i would need to see it to completion.  The later that same year i got my first 3D printer and i stated to flesh out some idea in tinker CAD. The process was slow and yielded some poor result.   Now armed with some experience in both Tinker CAD and 3D printing i can show you the start of what i want to do so long ago :).

This is the basic interior wall i started on. (the pipes would be a problem so i remove them on future designs)This is the basic interior wall i started on. (the pipes would be a problem so i remove them on future designs)
Soo Big, that stands about 13.5 inches (34.5cm) and took 26 hour to printSoo Big, that stands about 13.5 inches (34.5cm) and took 26 hour to print
2nd design i remove the vertical pips and added some windows. (also i just printing the lower half to save time and filament. I use up more than 4kg for filament since i started this project).2nd design i remove the vertical pips and added some windows. (also i just printing the lower half to save time and filament. I use up more than 4kg for filament since i started this project).

Supported by (Turn Off)

Leave a Reply

Supported by (Turn Off)