Skip to toolbar

Supported by (Turn Off)

Space Hulk Tactics – Hobby Challenge

Space Hulk Tactics – Hobby Challenge

Project Blog by jsmorgan

Recommendations: 46

About the Project

For this project I wanted to digitally recreate a Space hulk Board tile. I will create this proceduraly using Substance designer. Once I have a working tile piece this should allow me to create variations based off the board pieces. If this prof of concept works and if I get the opportunity it would be great to get a 3D print made. Fingers crossed and good luck everyone!

This Project is Active

The final piece is ready for printing soldier!!

Tutoring 2
Skill 5
Idea 2
No Comments
The final piece is ready for printing soldier!!

OK here is my final board piece I’m really happy how it turned out and learned a lot good luck everyone!! 🙂

Crawling in the pipes.

Tutoring 1
Skill 1
Idea 1
No Comments

Ok the last details to add was the pipework around the edge of the board. I simply modelled the pipes in 3D in Modo then combined them to the Zbrush board ans cut the pipes with the jigsaw piece using live boleans.

Creating the board pieces

Tutoring 1
Skill 3
Idea 3
No Comments

Cutting and Boolean objects in Zbrush to creat water tight pieces for printing I will probably add additional layer of pipe details around the edge to match the board merge that and create final model.

Get out the cutters

Tutoring 0
Skill 3
Idea 3
5 Comments

OK started adding the cutter shapes. To create the jigsaw attachments.

 

LET'S ROCK!

Tutoring 2
Skill 3
Idea 4
1 Comment

OK added some more shapes including the centre panel,hatch and extra bolts. I Will look at adding and working out the board pieces next and how they will slot together.

All right, gear up.

Tutoring 4
Skill 4
Idea 4
No Comments

Right reference gathered and I have started blocking out my main shapes for my Space Hulk floor panel tile. I will start looking at the 3×3 room with the red lighting and use this as my prof of concept. At this stage I will block out all the main forms. Once I have all the main forms and panels for the tile I will move on to how the tiles lock together.

Cheers JM

Supported by (Turn Off)