Skip to toolbar
OBS basics and video creation

OBS basics and video creation

Supported by (Turn Off)

Project Blog by sundancer Cult of Games Member

Recommendations: 563

About the Project

With me now having a little bit of experience with OBS (Open Broadcaster Software - Free and open source software for video recording and live streaming.) I thought I'd share some real basic things. This will be a WIP all the way. Feel free to add anything you know. OBS is not to be confused with "Streamlabs OBS" which is a fork of OBS and works a bit different.

This Project is Active

Chapter markers on YouTube

Tutoring 5
Skill 5
Idea 5
No Comments

Here’s a short update.

When you put a video on YouTube and you want chapter markers in it there are two things you need to keep in mind.

Thing the first: your very first time stamp needs to be something like this:

00:00 Start of the video

With the “00:00” YouTube ‘knows’ that you are starting chapter markers.

Thing the second: You can not put a URL behind a time stamp. It needs to be a short text.

01:00 Text of chapter description URL of said chapter

This will work. Just a short dash between time stamp and URL will not work! I’ve tested that.

I’ll try to implement chapter markers from now on. 🙂

Up your camera quality for cheap

Tutoring 11
Skill 9
Idea 9
No Comments

Yes, this sounds like a bad sales pitch but stay with me.

Let’s say you are using your old USB webcam to show things you build and paint on the internet. Chances are that you have a resolution of 720p or 1080p but all in all are very limited in features like zoom, white balance etc. Most of the time picture quality will be ok’ish.

You can now either go the big boy route and use a DSLR camera or a fancy action cam or something but those things tend to set you back more then 100€ easy.

But most of you already have a good to great camera in your possession. Your smartphone. Even cheap modern smartphones have better cameras then cheap webcams. Simply because the sensor chip inside is bigger (most of the time) And here enters a tiny piece of software that converts your phone to a great webcam:

DroidCam OBS

As the name implies this is for OBS use only. They did make a “generic” version as well (just called DroidCam) that you could use in any program.

Now DCOBS is free to use but for any “high def” resolution you get a watermark. Nothing to annoying especially for testing.

The optimal way this is set up is when your PC/Laptop is connected to the same network where also your wireless network is. In most private homes they do share the same IP range. But you also could attach the phone via USB but that is a different beast.

So what do you need:

  • your phone
  • a pc/laptop with the 64 bit version of OBS Studio installed
  • the DCOBS app (available for Android and iOS)
  • the DCOBS plugin for OBS (available for Linux, Windows and macOS) [I’ve tried Linux and Windows and both worked great]
  • some form of mounting apparatus for your phone like a tripod or similar.

Then you just:

  • install the app on your phone
  • install the plugin on your PC
  • launch the app (take note of your phones IP address  which the app provides)
  • launch OBS, add source as “OBS camera” and edit the properties.
  • put in the IP address, choose a resolution in which to run and hit “activate”

At this point your phone will be your new, shiny, fullHD webcam.

But of course, there are always some caveats.

First: you need to buy the “pro” version to get rid of the watermark. But the pro version also has some nice additional features like “remote control”. Though that is little more then a web interface to zoom, adjust white balance and focus without touching the phone itself.

Second and biggest drawback (in my opinion) is a limitation in the software when you face facing camera in your smartphone has a lower resolution then you front facing camera. So if your selfie cam does 720p and your normal cam 1080p you only can use DCOBS with 720p. So using any old smartphone for a good webcam really doesn’t work too well. The picture quality usually is still better then what your webcam does but it’s something to be aware of.

But here is something really good about it: you can use it on more then one device at the same time. I only tested two phones at ones but it works great.

And did  I tell you it only 10€? Yupp, for 10€ you get (theoretically) a never ending supply of webcams. So if you are one of those who get a new phone every year: your webcam will get better and better.

I hope this will help you improve your video.

Edit your videos

Tutoring 14
Skill 12
Idea 14
3 Comments

Up until now I have used “OpenShot” as my go-to video editor. Mainly because it’s simple, open source (free) and runs under windows and linux. But it has its drawbacks. Main one being the very “hit and miss” hardware acceleration for rendering your videos. Currently a one hour stream takes roughly an hour to render. So “small changes” to a video (fixing a typo or adding an overlay) lead to extensive time delays for publishing.

So the obvious choice would be to buy a software that does hardware acceleration. But these these tend to be very costly. Especially if you do this only for hobby.

But then luck smiled upon me. Humblebundle is currently selling Vega Pro 16 for ~25€. At the time of writing the sale will be going for another 7 days, ending 17th may.

https://www.humblebundle.com/software/vegas-pro-discover-your-endless-freedom-software

I bought it and did a testrender for the latest episode of Imperial Interlude and the rendering time was cut from 60’ish minutes to 25. The interface is completely different and there are so many more options in this program that I need a bit more time for getting the projects set up right but in general it works fine.

So if you are in need of a video editing tool that does a good job go grab it.

More than one webcam

Tutoring 15
Skill 10
Idea 11
No Comments

Bare with me, this is a bit of a rambly one:

Lets say you don’t want to talk all by yourself and you’ve managed somehow to get a co-host. Or someone to interview. How do you set up the cameras?

Well, keep in mind, that all cameras (excluding smartphones that are held wrong) are wider than high. basic 4:3 or 16:9 resolutions are the norm. Also keep in mind that currently (at the time of writing) most people have one monitor that has a resolution of 1920×1080 (fullHD) and most webcams work best at 1280×720 (HD ready). Usually the first impulse most people have is to put the cameras side by side. So the width of the camera doesn’t get used very well.

A better solution (IMHO) is to scale the cameras a bit down and leave “free space” on the screen. You want to keep the aspect ratio and if you stream fullHD that leaves 540px as height for camera. With a 19:9 ratio that’s 960px wide. So you have now filled 50% of your fullHD screen and are left (or right, depending where you put the cameras…. pardon the pun) with 960×1080 to use as “share stuff” screen. If you go down a bit more (for example 800×450) you can start to use (good looking) overlays.

Best way to think of the “where do I put what” is (in my experience) using a piece of paper and sketch it out. And keep in mind what your focus is. The people? The shown content?

Of course this all gets more complicated if there are more then two talking heads. But that is a story for another time.

When your video gets flagged

Tutoring 16
Skill 11
Idea 13
1 Comment

So at some point you will possibly hit a road block. You’ve used unlicensed material (maybe just background music) and YT blocks your entire video from being seen anywhere. Now what? Again: Don’t panic! If it is not a copyright strike (which YT will tell you) all is still good.

You have options at this point:

  • Use the YouTube editor to simply cut or mute the offending part. This is the most easy way out but YT takes ages to apply the changes…
  • Edit your own video and re-upload it. This is the more professional approach but also uses a lot of time. Edit, render, upload.
  • delete the video and tell YT to ********************

So there you have it. And here is an example of what YT deemed “not worthy” (though I took out the original song….)

Prepare for everything

Tutoring 18
Skill 11
Idea 13
4 Comments

So now you’ve set up all the scenes and sources and are streaming happily away…

…and you need to take a break. What now? Don’t panic!

Before any stream make sure you have a scene set up with a picture that has text on it, telling people what’s going on. Either “Intermission”, “Short break” or even “technical difficulties”. Add a long playing song or a sound loop or maybe even a rotating playlist of free music. Now, when the need arises, you can toggle that scene and leave your place to do, whatever you need to do.

 

Power at the tip of your fingers

Tutoring 16
Skill 12
Idea 12
No Comments

So this is more of a side note. As some may have seen in the last uHH I’ve added some pop up effects into the show. Most streamers use the Elgato Stream Deck for this kind of work, which is a very efficient way to do it. But also pricey.

This being a non-profit just for shits and giggles show I looked for free alternatives and I found Touch Portal. It’s a piece of software for PC/Mac that interfaces with your streaming software. The accompanying app (Android/iOS) then turns your phone or tablet into a streamdeck.

For OBS you need to install a plugin to get everything to work but that’s all explained in the tutorials on the Touch Portals website.

In the free version you have 2 pages of 2×4 buttons you can adjust to what ever you want. (Though one button on each page is needed to switch from one side to the other leaving you with not 16 but 14 useable buttons)

It works, it’s fun and I’m looking for some loony stuff to put in there.

Turning cameras and a clean workspace

Tutoring 18
Skill 12
Idea 13
2 Comments

So because I was always unhappy with my workspace I did some cleaning up.

And now I have a lot of space. But one other thing that bugged me: the top cam is the wrong side around and shows everything upside down. Remounting the cam is a PITA and so I looked… and found an option within OBS it self!

Just right click on the cam source, select “Transform” and then “Flip horizontally” and again “Flip vertically”. Tada a view from the top like I look at the things! HUZZA!

Turning cameras and a clean workspace

More traps

Tutoring 14
Skill 11
Idea 10
No Comments

If you, for what ever reason, change the port you’ve plugged your microphone or camera in: OBS will see that as a different source. So double check your source.

Traps when setting up multiple cams

Tutoring 17
Skill 14
Idea 14
No Comments

So when you feel the need to use two cameras you’ll run into some trouble. If you use two of the same USB cameras they will show up with the same name in the “add sources” dialog. So when adding the first camera and you use “Create New” give it a talking name. Like “facecam”, “deskcam” or “overhead” to later know which one it is.

Traps when setting up multiple cams

After that choose one of your two cameras and wait for the preview window to see if you’ve chosen the correct cam. If not, change to the other, if yes hit OK and add the second camera. Done.

But there is a catch. If you have used any of the cameras in another scene you can’t add it as additional camera. Because OBS is already grabbing that video feed. So really pay attention when naming the cameras. If you want to be 100% sure put labels on the cameras so you know the physical camera labelled “Joe” is “Joe” in OBS.

Transition and multiple scenes

Tutoring 17
Skill 16
Idea 16
No Comments

So having a static stream is nice and all but can get boring after a while. So you set up different scenes. That is the box in the lower left corner. HOLD YOUR HORSES!

Before you hit that + and try to recreate the scene you already have with maybe a second camera or cameras having switched angeles I want to save you a buttload of work. Right click on you existing scene and click “duplicate”. Now you have an exact copy of your previous scene and can modify that. How is that for convenience?

Transition and multiple scenes

After you’ve set up a second scene you may want to hit the “Studio Mode” button on the far right.

Now we have the upcoming scene on the left and the current streaming/recording on the right. If youclick “transition” in the middle OBS will transition to the next scene you have highlighted. So let’s say you’ve got scene a, b and c set up and a is currently live. When you select b in the lower left corner under “scenes” and hit “transition” the feed/recording will transition to b. Hit “transition” again and it will go back to a.

Try it. Experiment.

This is all from me now. I will add more when I find “important” features. Until then: happy streaming.

Transition and multiple scenes

Basic streaming

Tutoring 18
Skill 16
Idea 16
No Comments

After you’ve set up your OBS I recommend testing it with the “Start Recording” feature just to make sure audio levels are good and there is actually something to see. When you’re happy with the playback we need to get OBS and twitch to play together.

Under “File” – “Settings” – “Stream” you shoose “Twitch” as a service and hit “connect Account”. This way you’ll have a bit more control while streaming other then just using your Stream key (which you can get from your account on twitch.tv. NEVER SHOW YOUR STREAM KEY TO ANYONE! People will make use of that and you’ll end up banned from twitch. )

And that is it. You’re set up and hit “Start Streaming”. But put on some clothes first… and maybe comb your hair… and have fun!

Basic streaming

Basic setup

Tutoring 18
Skill 16
Idea 16
No Comments

After you’ve installed and started OBS you’ll be greeted by a relatively blank screen. First thing we need to do is get some video onto the screen. Click on the plus on sources.

Basic setup

Here you select A) video recording with the little cam symbol.

Basic setup

Give you source a “speaking” name so that you’ll have an easier time finding it later.

We leave all settings “as is” to begin with and we will see how the cam will appear on the main screen. If you use an extra microphone for better audio quality also add a source using B) and add your mic.

Basic setup
Basic setup

The red frame around the webcam can be picked with clicking and holding the mouse and then resized be pushing an pulling. Next you might want an overlay to make it all look shiny and cool. There are several sites out there providing free overlays. Just search them. Or snag them from some other site 😉 (No, don’t pirate, only use with permission!) If you’re handy with GIMP or photoshop you could make your own. It’s just a picture with a transparent background. So select the + on sources again and click C) for picture. The picture should be the same resolution as you’re streaming in. Default here is 1920 x 1080.

Basic setup

Last thing we now need is something to show. In my case the project from OTT. So open a new browser window (not a new tab because you’ll be showing the complete window! And you don’t want the world to see what sites you are browsing).

Now add a new source again but use “Window Capture” not “Browser” or you’ll use the build in browser which can lead to websites acting strange. Add your new browser window (as Window Capture, yes it’s confusing) and make sure it’s on the very bottom of the sources list.

Sources stack like layers of paper so the overlay needs to be on top of everything and everything else needs to be “sorted as needed” (see next picture)

Now you’re set up for recording. Well done! Next up: streaming.

Basic setup

Basic requirements

Tutoring 18
Skill 15
Idea 16
No Comments

The basic requirements for streaming and/or recording video with OBS are:

  • PC or laptop (PC, Mac or Linux)
  • A webcam
  • the OBS Software (link)

That’s it. And if you don’t want to be seen and only show web pages you could drop the webcam and just use a headset or microphone. If you want to live stream and not just record you need to setup an account with twitch.tv.

This tutorial will work along with my setup which is:

  • PC with Windows 10 Pro
  • Logitech C270 USB webcam
  • Fifine USB mic K669B
  • OBS Software (currently version 25.0.1)
  • Twitch account

It is to be assumed that all hard- and software is installed and running. So let’s get preparing the first stream.

Supported by (Turn Off)