Reply To: Help please!

[limburger 21822xp 3]

surely those ‘lines’ can be fixed with greenstuff or something similar ?

I also wonder how ‘visible’ those lines are on a 15mm scale building when you’re at standard ‘table distance’.

//

@redvers I think you’ll need to design using multiples of whatever nozzle-thickness your target printer has.
If it has a 0.4 mm nozzle then you either have to do a 0.4 mm wall or a 0.8 mm wall, because you can’t do 0.5mm (unless you add that extra 0.1 mm or find a way to remove excess material (either method means more work … ).

You could also start by modifying an existing design or use that as a template for your own.